China Custom 180HP Road Machinery Bucket Blade Motor Grader Gr180 in Stock with Hot selling

Solution Description

180HP Street Machinery Bucket Blade Motor Grader Gr180 in Stock

New look layout.
The articulation frame is adopted and matched with the steering of the entrance wheel, With modest turning radius, maneuvering and adaptable.
The electro-hydraulic controls the electricity change gearbox, with 6ahead gears and 3 back again gears.
The worldwide matching hydraulic areas are adopted, with reliable operation.
The motions of the blade are totally hydraulically managed.
The rear axle is the 3-section driving axle which is presented with the NO-SPIN self-locking differential mechanism.
The manipulation table and seats are adjustable. The arrangement of the manipulation deal with and instruments are affordable, with practical application, and the convenience of driving is improved.
The cab is grand and nice, with vast eyeshot and excellent sealing.
The entrance bulldozing plate, rear scarification device, front scarification harrow and automatic leveling system can be additional.

GR180
Basic specification
Motor design CUMMINS CTAA8.3 /SC 8D190G2B1
Rated electrical power/velocity 138kW/2200  140kW/2300rpm
Dimension(LxWxH) 8900×2625×3470mm
Operating weight(Normal) 15400kg
Performance specification
Travelling velocity ,ahead five,8,11,19,23,38 km/h
Travelling speed ,reverse 5,eleven,23 km/h
Tractive drive(f=.8) 84KN
Max. gradeability thirty%
Tire inflation pressure 260 MPa
Operating hydraulic strain 18 MPa
Transmission force one.3~1.8MPa
Operating specification
Max. steering angle of entrance wheels Remaining / Right50°
Max. lean angle of front wheels Still left / Right17°
Max. oscillation angle of entrance axle Up / down15°
Max. oscillation angle of equilibrium box Just before / after15
Frame articulation angle Left / Right27°
Min. turning radius using articulation 7.3m
Blade
Optimum raise above ground 450mm
Greatest depth of slicing 500mm
Highest blade place angle 90°
Blade cutting angle 28°_70°
Circle reversing rotation 360°
Moldboard height X width 3965×610mm

 

Racks, when utilised with spur gears, convert rotational movement to linear movement. EP Gear’s racks are made to work with our inventory 14 1/2° and 20° PA spur gears. Typically, racks are modified to fit specific applications. This could include drilling and tapping mounting holes, reducing to a certain length, or matching the ends of two racks to create a for a longer time constant duration than stock.
EP’s racks convert rotational motion to linear motion when utilized with spur gears. It is created to operate with our inventory 14 1/2° and 20° PA spur gears. It can be modified for particular programs, these kinds of as drilling and tapping mounting holes, cutting to certain lengths, or matching the finishes of two-piece racks to develop continuous lengths for a longer time than inventory.

China Custom 180HP Road Machinery Bucket Blade Motor Grader Gr180 in Stock     with Hot selling